|
|
|
|
|
Distributors Parts (4 Results) |
|
| 5005071601 - Mallory 1932-41 Flathead 3 Bolt Electronic Distributor |  |
|
Part Name: Mallory 1932-41 Flathead 3 Bolt Electronic Distributor
Part Number: 5005071601
|
|
$575.77 |
1932-1941 3-bolt mount electronic Mallory ignitions. 12 volt.Note: This distributor requires 1.4 ohms of coil resistance. If you are using a coil with less than 1.4 ohms, you must us a ballast resistor that will achieve the required 1.4 ohm total resistance. Includes Crab Style Distributor Cap.
|
| |
| D100700 - SBC/BBC PERTRONIX Billet Distributor w/ Black Cap |  |
|
Part Name: SBC/BBC PERTRONIX Billet Distributor w/ Black Cap
Part Number: D100700
|
|
$280.06 |
PERTRONIX IGNITOR III DISTRIBUTOR. Plug N Play Distributors feature the patented Ignitor III (electronic ignition module) with adaptive dwell control and integrated Hall Effect circuit that is triggered by cobalt magnets for stable timing and precise spark distribution. A powerful micro controller with adaptive dwell algorithms allows the Ignitor II to adjust the dwell angle in order to maintain peak energy throughout the entire RPM range for increased high and low RPM performance. Because peak current level is reached just prior to spark, ignition energy is sustained with less heat buildup in the coil and module.Pertronix Flame-Thrower Plug N Play Billet Distributors Features* Compatible with most capacitive discharge systems* Available with or without vacuum advance* High dielectric strength cap with female or male brass terminals* Caps available black or red* Premium rotor with brass contact* Polished billet aluminum housing with 0 to -0.003 tolerances* Tempered distributor shaft with low torsion displacement for accurate timing and longer life* .500'' Diameter Shaft on GM Applications* Upper ball bearing and lower bronze bushing reduce friction and high-RPM vibration* Durable Heat-Treated Gear* Precision stamped advance weights eliminate erratic timing* Factory-set performance advance curve (additional springs included for custom curves)* Adjustable mechanical advance with proprietary limiting functions for multiple settings* 50-state legal via EO #D-57-12 except for distributors without vacuum advance
|
| |
| D1050 - SBC/BBC PERTRONIX Distributor |  |
|
Part Name: SBC/BBC PERTRONIX Distributor
Part Number: D1050
|
|
$297.68 |
PERTRONIX STREET/STRIP HEI DISTRIBUTOR. Pertronix Flame-Thrower HEI Distributors are far superior to OE distributors: they operate without misfires beyond 7500 RPM (nearly 3000 RPM higher than stock); they produce 67% more energy; and they are 45% faster at getting the spark to the plugs.# Pertronix Flame-Thrower HEI Distributors Features All new components, including a cast aluminum housing.* Bronze bushings for less friction and longer life* Balanced rotor w/nylon screws prevents arcing, reduces vibration* Adjustable vacuum advance canister* 50-state legal via EO #D-57-5
|
| |
| D1070 - PERTRONIX HEI CHEVY RACE DISTRIBUTOR |  |
|
Part Name: PERTRONIX HEI CHEVY RACE DISTRIBUTOR
Part Number: D1070
|
|
$342.29 |
PERTRONIX HEI CHEVY RACE
HEI RACE DISTRIBUTOR
Pertronix Flame-Thrower HEI Race Distributors
Reliable 7.2 amp Module with 50,000 volt Coil
Compared to Pertronix standard HEI distributors, Race Only units produce 42% more energy in the coil with 46% faster spark breakdown time, which allows 48% more peak current to reach the spark plugs in the 6000 to 8500 RPM range. This abundant energy doubles spark intensity during the critical 1 millisecond of burn time.
* Pertronix Flame-Thrower HEI Race Only Distributors FeaturesAll new Pertronix components, including a cast aluminum alloy housing
* Bronze sintered bushings for less friction and longer life
* Balanced rotor w/nylon screws prevents arcing, reduces vibration
* Vacuum lockout stops changes to rotor phasing for max burn time
* TIG-welded rotor and advance plates deter high-RPM distortion
* Chrome moly weights and center plate eliminate erratic timing
Note: Not legal for sale or use on pollution-controlled vehicles
|
| |
|
|
|
|